vikas kumar's blog

How to Configure Idea Net Setter in NEKTech-Linux V1.0

vikas kumar's picture

Configuring Idea Net Setter

# The following steps should be followed while configuring the net setter.

1. Connect the Idea Net Setter into your computer system.
2. Open Terminal (Ctrl+Alt+T)
3. Type the following command :
a. lsusb
and identify idVendor and idProduct

e.g. Bus 003 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552/E1800 (HSPA modem)

idVendor=12d1
idProduct=1446

Subscribe to RSS - vikas kumar's blog